23299

 

II*  

Designated  

19/05/2000  

19/05/2000  

Dock walls and gate between inner dock and outer basin at Briton Ferry Docks  

 

Neath Port Talbot  

Briton Ferry  

 

Briton Ferry Docks  

273721  

193641  

 

On the S side of the elevated M4 400m E of the River Neath.  

Maritime  

 

The Briton Ferry Dock Act was passed in 1851 and the dock was opened in 1861. Its engineer was Isambard Kingdom Brunel who died in 1859 before the project was completed. It comprised an inner floating dock and an outer tidal basin, between which was a hydraulically powered lock gate. This was a single buoyant wrought iron gate 56 feet (17.1m) long and 31 feet 6 inches (9.6m) deep at the centre. Only the lower portion of the gate survives, the upper portion having been cut away for scrap. The hydraulic power was generated from the adjacent engine house, of which the tower survives. The dock closed in 1959, subsequent to which the inner floating dock has silted up, with the high-level A48 and M4 built partly over it, and its entrance infilled.  

The walls and gate stand at the junction between the inner dock and outer basin. They are of snecked rock-faced sandstone with large dressed coping stones. On the W side of the basin the walls form a large square quay, approximately 70m x 80m, walled on 3 sides with rounded SE corner and a rounded bastion to the NE corner. The opposite quay is narrower, approximately 50m x 15m. The dock walls are strengthened with additional concrete through the channel between the basins. The lock gate is said to survive partially but was not visible at the time of inspection.  

 

Listed grade II* for industrial archaeological interest as the major surviving built component of Brunel's docks, notable for the innovative use of hydraulically powered bouyancy chambers in its lock gate, and for group value with the adjacent engine house. Scheduled Ancient Monument Gm445 (NEP).