6557

 

II  

Designated  

31/07/1991  

01/09/1997  

Kilgetty Colliery Chimney Base  

 

Pembrokeshire  

Amroth  

Tenby  

Stepaside  

213846  

207781  

 

In the yard of Stepaside Coachworks off Kilgetty Lane, behind the Weighbridge Office and to the N of the winding engine house of Engine Pit.  

Industrial  

 

Kilgetty Colliery consisted of several pits, the first documented of which was sunk in 1775. These were abandoned and re-opened on numerous occasions. A beam engine was bought from the Neath Abbey Iron Company for the colliery in c.1811, and further pits were sunk in the 1840s. During the 1850s the colliery prospered, providing coal for the Kilgetty (or Stepaside) Ironworks, but it declined in the 1860s. It last operated from 1937 to 1939 under the Kilgetty Anthracite Colliery Company, when over 250 men were employed. The chimney probably dates from the early to mid C19. The height appears to have been about 20 m but the upper part was demolished by the Army in 1972. It appears to have been built as a boilerhouse chimney, but may later have served for mine ventilation: such ventilation chimneys are a rarity.  

The stump of the chimney is about 2.5 m square externally and 1.25 m square internally, and rises to a surviving height of about 4.5 m above the ground level of the yard. It is built of rubble sandstone with dressed quoins in a style similar to that of the weighbridge office. The chimney tapers slightly to a height of about 3 m, above which its taper is more gentle. The uppermost surviving parts are roughly broken and covered in ivy. Two arched openings into the base are visible. The opening in the N side is connected to a flue in firebrick which can be traced for several metres along the bank at the E side of the yard, but the nearside wall and the arched top of the flue have disappeared. The flue is about 1 m in height internally above present ground level. This may have been the site of a boiler house. A second aperture in the chimney faces W, above the height at which the main flue joins. This aperture 0.6 m wide by 0.8 m high has a hinged iron access cover and was for servicing the chimney. The chimney is included for group value with the surviving engine house and weighbridge house.  

 

Listed for group value with the surviving engine house and weighbridge house.